Karcher BP 2 Garden - Manual (Page 19)

– 4

Children must not play with
this appliance.

Supervise children to prevent
them from playing with the
appliance.

Cleaning and user mainte-
nance must not be performed
by children without supervi-
sion.
Caution
Create stability for the appliance
prior to all work on or with the
appliance to prevent accidents
or damage.
The stability of the appliance is war-
ranted when it is placed onto an even
surface.
1 Connection adapter for pumps G1
2 Stopper
3 Connection G1 (33.3 mm) suction
pipe (inlet)
4 Connection G1 (33.3 mm) delivery
line (output)
5 ON/OFF switch
6 Cable clip
7 Power cord with plug
8 Suction hose set* incl. 3.5 m ready
for connection, vacuum-proof spiral
hose with suction filter and back-
flow stop
* Included in the scope of delivery with
sets only.
 Remove the plug.
Illustration
 Screw the connection adapter in
the suction connection of the pump
(inlet).
Tighten manually.
 Connect the vacuum-proof suction
hose.
Note
Depending on the degree of soiling of
the fluid to be delivered, use a pre-filter
(see accessories).
Note
In order to reduce the time required for
suction to start again, use a suction
hose that is equipped with a backflow
stop. This prevents the emptying of the
suction hose after use (see accesso-
ries).
Illustration
 Fill the pump with water via the de-
livery connection until it is overflow-
ing.
Illustration
 Screw the connection adapter in
the delivery connection of the pump
(outlet).
Tighten manually.
 Connect delivery line.
 Insert the mains plug into the sock-
et.
 Switch on the appliance using the
ON/OFF switch.
Illustration
 In order to reduce the suction time,
lift the delivery hose approx. 1m.
 Wait till the pump sucks in and
transports water uniformly
Note
The ON/OFF switch can also be con-
veniently operated with your foot.
Prerequisites for the
appliance's stability
Operation
Description of the Appliance
Preparing the Appliance
Operation
19 EN