Tabelle, Tabellenkopfzeile, Tabellenreihe – Karcher KMR 1250 BAT User Manual

Page 5: Troubleshooting, Tabellenhaupttext, Grafik, Appliance cannot be started, C bat version, Switching on the charger, D bat pack version

Advertising
background image

QUICKSTART

5.964-004.0 02/11

Troubleshooting

1

A

C

B

D

Appliance cannot be started
A Sit on the driver seat, the seat contact switch

gets activated

B Turn the ignition key to position "I" -

the battery display lights up.

C Bat version

Remove battery plug and join it to the
charging cable.
Switching on the charger

D Bat pack version

Remove the mains cable from the
storage bin.
Connect the charger to the mains and
turn it on.

2

A

Engine is running but machine is not moving
A Check setting of freewheel lever

3

A

B

Machine is not sweeping properly
A Check roller brush and side brushes for wear,

replace if necessary.

B Adjust sweping track
C Check function of bulk waste flap

4

A

Dust gathers in the machine

ƽ

Danger

Risk of injury! When emptying the waste
container, care should be taken to ensure that no
persons or animals are within its swivelling
range.

ƽ

Danger

Danger of crushing. Never reach into the rod
assembly for the drainage mechanism. Stay
away from the area under the raised container.

ƽ

Danger

Danger of tipping. Place the machine on an even
surface during emptying.

A Empty waste container

Raise waste container.
Tip waste container out.
Tilt the waste container up to the
end-position.

B Check dust filter, clean or replace

Advertising
This manual is related to the following products: