6 avanced setting, 1 alarm setting – Approach Tech DVR-3016 User Manual
Page 42
40
5.6 AVANCED SETTING
This page includes multiple special functions.
5.6.1 ALARM SETTING
This page enables you to set all the various alarm - related functions. The device will record as long as
the alarm is activating.
1. ALARM DURATION:
Set the desired time period. The options range from "TRANSPARENT" to "NONSTOP", from one
second to 60 minutes.
NOTE: You can't set a time frame of so many seconds and minutes at the same time.
2. DISK - FULL ALERT:
This signals a disk is fully recorded. The options are "ON' and "OFF".
ON: Enables the function.
OFF: Disables the function.
3. PREALARM:
This option determines that images prior to an alarm will be recorded in the hard- disk drive. When
an alarm is triggered the device will record the images prior to the alarm for 10 seconds.
ON: Enables the function.
OFF: Disables the function.
MAIN MENU
1 QUICK SETTING:
ENTER
2 DISPLAY OPTION:
ENTER
3 SEQUENCE SETTING:
ENTER
4 PICTURE ADJUST:
ENTER
5 OPERATION LOG:
ENTER
6 ADVANCED SETTING:
ENTER
7 DEFAULT SETTING:
ENTER
8 PASSWORD SETTING:
ENTER
9 EXIT MENU:
ENTER
enter: select
▲
/▼/jog/ch1~9: item
ADVANCED SETTING
1 ALARM SETTING:
ENTER
2 RECORD SETTING:
ENTER
3 MOTION SETTING:
ENTER
4 CAMERA COVERT:
ENTER
5 OPERATION LOCK:
ENTER
6 COMMUNICATION:
ENTER
7 DISK SETUP:
ENTER
8 SCHEDULE:
ENTER
RETURN
menu: exit
enter: select
▲
/▼/jog/ch1~8: item
ADVANCED SETTING
1 ALARM SETTING:
ENTER
2 RECORD SETTING:
ENTER
3 MOTION SETTING:
ENTER
4 CAMERA COVERT:
ENTER
5 OPERATION LOCK:
ENTER
6 COMMUNICATION:
ENTER
7 DISK SETUP:
ENTER
8 SCHEDULE:
ENTER
RETURN
menu: exit
enter: select
▲
/▼/jog/ch1~8: item
ALARM SETTING
1 ALARM DURATION:
30 SEC
2 DISK FULL ALERT:
ON
3 PREALARM:
OFF
4 ALARM RECORD RATE:
60 F/S
5 ALARM RECORD MODE:
ENTER
6 ALARM RECORD QUALITY: ENTER
7 SENSOR TYPE:
ENTER
8 ALARM INPUT LINK:
ENTER
9 ALARM OUT LINK:
ENTER
RETURN
menu: exit
enter: select
shuttle: value
▲
/▼/jog/ch1~9: item