Approach Tech DVR-3016 - Manual (Page 80)

78
APPENDIX 2. – Using CD Discs (FOR CD-ROM MODEL ONLY)
Please note that when using CD-ROM, CD-R and CD-RW discs, do not write or stick anything on the surface
as this could cause an error in recording or the data on the disc may be damaged.
Inserting Disc
1. Please press the eject button.
2. Please place the disc in the tray.
NOTE: When using a 12 cm disc please place it in the center of the caddy where you are able to see
the larger position specifically for the 12 cm disc. When using an 8 cm disc please place it in
the center of the caddy where you can see the position for the 8 cm disc. Please place the
printed side up. Never place two discs in the caddy at the same time.
3. Please do not touch the surface of the disc where it has been recorded.
4. To insert the caddy please press the insert / eject button and hold the caddy lightly at the middle of its front
and push gently to insert.
Ejecting The Disc
1. Press the eject button.
2. Carefully lift out the disc.
3. Press the eject button, or lightly touch the center of the tray and the tray will automatically reenter its
position within the CD - RW recorder.
Caution: After the tray has been ejected and the disc has been retrieved from the caddy or put in the
caddy, insert the tray in its original position to avoid the accumulation of dust or
miscellaneous items inside the caddy, or else the pick up head may be affected when it
needs to remain clean for effective reading of the data.