Sound adjustment, Selecting the sound quality — eq7, Customizing the equalizer curve — eq7 tune – Sony XNV-660BT User Manual

Page 48: Adjusting the sound characteristics

Advertising
background image

48

Sound Adjustment

Selecting the sound quality
— EQ7

You can select an equalizer curve from 7 music
types (“Xplod,” “Vocal,” “Edge,” “Cruise,”
“Space,” “Gravity,” “Custom,” or “OFF”).

1

During reception/playback, touch
“Source List,” then

.

2

Touch “Sound.”
The sound setting menu appears.

3

Touch “EQ7.”
The options appear.

4

Touch the desired equalizer curve.
The setting is complete.

To cancel the equalizer curve, select “OFF.”
To return to the previous display, touch “Back.”

Customizing the equalizer curve
— EQ7 Tune

The EQ7 “Custom” curve allows you to make
your own equalizer settings. You can adjust the
level of 7 different bands: 62 Hz, 157 Hz,
396 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz.

1

During reception/playback, touch
“Source List,” then

.

2

Touch “Sound,” then “EQ7.”

3

Touch “Custom,” then “Tune.”
The tuning display appears.

4

Touch +/– of each frequency to adjust
their levels.
The level is adjustable in single steps,
between –8 and +8.
To restore the factory-set equalizer curve,
touch “Reset.”

5

Touch “OK.”
The setting is complete.

To return to the previous display, touch “Back.”

Tip
Other equalizer types are also adjustable.

Adjusting the sound
characteristics

The sound balance between left and right
speakers (“Balance”) and front and rear speakers
(“Fader”) can be adjusted to your preference.
You can also adjust the volume level of the
subwoofer if it is connected.

1

During reception/playback, touch
“Source List,” then

.

2

Touch “Sound.”
The sound setting menu appears.

3

Touch “Balance/Fader.”
The setting display appears.

4

Touch

B/V/v/b to adjust the balance/

fader.
The level is adjustable in single steps between
–15 and +15 (Balance)/–15 and +15 (Fader).

5

Touch +/– to adjust the volume level of
the subwoofer.
This setting is adjustable only when a
subwoofer is connected and “Subwoofer” is
set to “ON” (page 57).
The level is adjustable in single steps,
between –6 and +6.

To return to the previous display, touch “Back.”

ATT

Reset

OK

Back

EQ7 Tune : Custom

Top

62 Hz

0

157 Hz

0

396 Hz

0

1 kHz

0

2.5 kHz

0

6.3 kHz

0

16 kHz

0

ATT

Back

Balance/Fader/Subwoofer Level Adjust

Top

0

Subwoofer

Fader : 0

Balance : 0

Advertising
This manual is related to the following products: