Step 5: connecting power cords to the apc modules, Next steps, Continue with – Adaptec FS4100 User Manual
Page 12: Step 5, Connecting power cords to the apc modules
11
Step 5: Connecting Power Cords to the APC
Modules.
Connect one of the supplied power cords to each of the APC
modules and to a grounded power outlet.
Caution:
Always use a regulating uninterruptible power
supply (UPS) to protect your Storage Enclosure.
Next Steps
See the Adaptec 2U Storage Enclosure Installation and User’s Guide on
the CD for instructions on how to complete these final installation
and set-up tasks for your specific Storage Enclosure model:
■
Powering on your system and configuring your enclosure.
■
Installing the storage management software:
■
The FS4100, FC4100, and SC4100 Storage Enclosures are
managed with Adaptec Storage Examiner software. (Refer to
the Adaptec Storage Examiner User’s Guide on the CD included
with your kit for detailed usage instructions.)
■
The FS4500 Storage Enclosure is managed with Spheras
RAIDWatch software. (Refer to the Spheras RAIDWatch
User’s Guide on the CD included with your kit for detailed
usage instructions.)
!