Sony TDM-NC1 - Manual (Page 22)

22
GB
Registering the TDM-NC1 on your computer
manually
When the TDM-NC1 is connected to your computer after installing
the M-crew Server, the TDM-NC1 is registered automatically on your
computer. Register the TDM-NC1 on your computer manually for
higher security.
1
Turn on the AV system with DIGITAL MEDIA PORT interface
(Sony DAV series, etc.).
2
Press MENU
*1
on the remote.
3
Press . or > on the remote repeatedly until
“REGISTER?”
*2
appears, and then press ENTER on the
remote.
The count down display appears in the display of the TDM-NC1.
4
Click [Start] – [All Programs] – [M-crew Server] – [TOOLS]
– [EQUIPMENT LIST] in that order.
The “M-crew Server EQUIPMENT LIST” window appears on
your computer screen.
5
Set “Equipment selection mode:” to “Manual”, and click
[Add] on your computer.
The registration starts.
“Complete!” appears in the display of the TDM-NC1 when the
registration is complete.
*1 “NETWORK MENU” appears in the case of NAS-CZ1 and “MENU” appears in the
case of CPF-IX001.
*2 “REGISTRATION?” appears in the case of NAS-CZ1 and “REGISTER?” appears
in the case of CPF-IX001.