Sony TDM-NC1 - Manual (Page 24)

24
GB
Making the wireless LAN function settings for
connected equipment (WLAN Setup Assistant)
Search for connected equipment in order to make the wireless LAN
function settings for the connected equipment.
“WLAN Setup Assistant” is installed at the same time as M-crew
Server, but it can also be installed independently.
For details on the wireless LAN setup, see “Case C: Wireless
connection (setting up by the computer)” of the Operating Instructions
supplied with the TDM-NC1.
1
Turn on the AV system with DIGITAL MEDIA PORT interface
(Sony DAV series, etc.).
2
Press MENU on the remote.
3
Press . or > on the remote repeatedly until “SETUP
BY PC?” appears, then press ENTER on the remote.
The count down display appears in the display of the TDM-NC1.
4
Click [Start] – [All Programs] – [M-crew Server] – [TOOLS]
– [WLAN Setup Assistant] in that order.
The “WLAN Setup Assistant” window appears on your
computer screen.
5
Click [Next].
Equipment search starts.
When connected equipment is found, the wireless LAN setup
screen for that equipment is displayed.
If no equipment is found, check the connection and perform the
procedure again from step 3. For details on connections, see
“Case C: Wireless connection (setting up by the computer)” of
the Operating Instructions supplied with the TDM-NC1.