Test flash – Sony HVL-MT24AM User Manual

Page 40

Advertising
background image

HVL-MT24AM_GB 2-889-493-01 (1)

0

Test flash

You can try one test flash before shooting. Use test flash mode when using a flash

meter in manual-flash mode.

1

Press the TTL/M/Test button to turn on the test-flash lamp

.

Each time the TTL/M/Test button is pressed to change the TTL and M lamp

be sure to check that the appropriate lamp is on. (See page 33 for the display

sequence.)

2

Press the TEST button (test/modeling flash button) .

 With TTL flash metering, the test flash will fire at full power when the

TEST button is pressed.

 In manual flash mode, the test flash will fire at the selected power level

when the TEST button is pressed. When using a flash meter, use manual

flash mode.

Advertising