Sony ICD-PX333 User Manual
Quick start guide, Check the supplied items, Welcome to your new sony ic recorder
ICD-PX333 4-449-566-61(1)
IC Recorder
Quick Start Guide
4-449-566-
61(1)
© 2013 Sony Corporation Printed in China
ICD-PX333
ˎ IC Recorder (1)
ˎ USB connecting cable (1)
ˎ Stereo Microphone with
Shirt‑Clip (1)*
ˎ LR03 (size AAA) alkaline
batteries (2)
ˎ Application Software, Dragon
NaturallySpeaking (DVD‑ROM)
(1)*
ˎ Quick Start Guide
ˎ Application Software, Sound
Organizer (Installer file stored in
the built‑in memory so that you
can install it to your computer.)
ˎ Help Guide (HTML file stored
in the built‑in memory so it
can easily be copied to your
computer.)
* supplied with some models in
some regions.
Check the supplied items.
ˎ Electret condenser microphone
ECM‑CS10, ECM‑CZ10,
ECM‑DS30P, ECM‑CS3
ˎ Rechargeable battery
NH‑AAA‑B2EN, NH‑AAA‑B2KN
ˎ USB AC adaptor AC‑U50AG
ˎ Compact charger & 2‑pc
AAA Multi‑Use Premium
batteries BCG‑34HS2KAN,
BCG‑34HW2KAN
Optional accessories
Welcome to your new Sony IC recorder!
This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.
Note
Depending on the country or region, some of the models or optional accessories are not available.
On power
Operate the IC recorder on 3.0 V or 2.4 V.
Use two LR03 (size AAA) alkaline batteries or NH‑AAA
rechargeable batteries.
On safety
Do not operate the IC recorder while driving, cycling
or operating any motorized vehicle.
On handling
ˎ Do not leave the IC recorder in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or mechanical shock.
ˎ Should any solid object or liquid fall into the IC
recorder, remove the battery and have the IC
recorder checked by qualified personnel before
operating it any further.
If you have any questions or problems concerning
your IC re corder, please consult your nearest Sony
dealer.
Precautions
Capacity (User available capacity*
1
*
2
)
4 GB (approx. 3.60 GB = 3,865,470,566 Byte)
*
1
A small amount of the built‑in memory is used for file management and therefore not available for user storage.
*
2
When the built‑in memory is formatted with the IC recorder.
Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*
3
Approx. 37.5 mm × 114.0 mm × 20.9 mm
Mass (JEITA)*
3
Approx. 74 g including two LR03 alkaline batteries
*
3
Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association)
Let’s try out your new IC recorder
Utilizing Your Computer
WARNING
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a
long time.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Notice for the customers: the following information is only applicable to equipment sold in the countries
applying EU directives
This product has been manufactured by or on behalf of Sony Corporation, 1‑7‑1 Konan Minato‑ku Tokyo, 108‑0075 Japan.
Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized
representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee
matters, please refer to the addresses provided in the separate service or guarantee documents.
Caution
Battery
1. Power on.
Slide and lift the battery compartment lid, then insert
batteries with the correct polarity.
Turn the power on.
To prevent unintentional operations (HOLD)
2. Set the date and time.
Press –
or + to set the year (the last two digits of
the year), and then press
PLAY/STOP•ENTER. Repeat
this procedure to set month, day, hour, and minute in
sequence.
3. Select the menu language.
Press DISP/MENU.
Press –
or + to select “Detail Menu”, and then
press
PLAY/STOP•ENTER.
Press –
or + to select “Language,” and then press
PLAY/STOP•ENTER.
Press –
or + to select the language that you want
to use in the display window, and then press
PLAY/
STOP•ENTER.
Press
(stop) to return to the stop mode display.
4. Record.
¼ Before you start using the IC recorder, make sure that you slide the
HOLD•POWER ON/OFF switch towards the center to release the
HOLD status.
Press
REC/PAUSE.
Recording starts and the operation indicator (
‑A) flashes in
orange, and then lights in red.
¼ You can pause recording by pressing REC/PAUSE. Press
REC/PAUSE again to restart recording.
Place the IC recorder so that the built-in microphone face
the direction of the source to be recorded.
Press
(stop) to stop recording.
The “Accessing...” animation appears and the recording stops.
5. Listen.
Press
PLAY/STOP•ENTER.
Playback starts and the operation indicator (
‑A) lights in
green.
Adjust the volume by pressing VOL –/+.
Press
(stop) to stop playback.
6. Erase.
Once a file is erased, you cannot restore it.
Press ERASE.
“Erase?” is displayed and the file to be erased is played back
for confirmation.
Select “YES” using –
or +, and then press
PLAY/STOP•ENTER.
The “Erasing...” animation appears and the selected file is
erased.
Installing the help guide on your computer
By installing the help guide on your computer from the built‑in memory of the IC recorder, you can
search for detailed operations and possible solutions when a problem occurs.
Connect the
(USB) connector of the IC recorder with the USB port of your running
computer with the supplied USB connecting cable inserted into the connectors securely
until each plug stops to the end.
In Windows: Click [Computer] (or [My Computer]), then double-click [IC RECORDER]
[FOR WINDOWS].
In Mac: Double-click [IC RECORDER] on the desktop.
Install the help guide.
In Windows: Double‑click [Help_Guide_Installer] (or [Help_Guide_Installer.exe]).
In Mac: Double‑click [Help_Guide_Installer_for_mac.app]. (v10.5.8 or higher)
Follow the instructions that appear on the screen to proceed with installation.
After the installation completes, double-click the [icdp33_ce_HelpGuide] icon in the
desktop for Windows (or in Finder for Mac).
The help guide is displayed.
You can also view the help guide on the following Sony IC Recorder customer support home
page:
http://rd1.sony.net/help/icd/p33/ce/
You can select the following languages:
English, French, German, Spanish, Dutch, Italian, Portuguese, Swedish, Hungarian, Czech, Turkish,
Polish, Greek, Russian, Ukrainian.
Copying files from the IC recorder to your computer
You can copy the files and folders from the IC recorder to your computer to store them.
Connect the IC recorder to your computer.
Copy files or folders you want to transfer to your computer.
Drag and drop the files or folders you want to copy from “IC RECORDER” or “MEMORY CARD” to
the local disk on your computer.
To copy a file or folder (Drag and drop)
IC RECORDER or
MEMORY CARD
Your computer
Click and hold,
drag,
and then drop.
Disconnect the IC recorder from your computer.
Installing Sound Organizer
Install Sound Organizer on your computer.
Note
Sound Organizer is compatible with the Windows PC only. It is not compatible with Mac.
¼ When installing Sound Organizer, log in to an account with administrator privileges.
Connect the
(USB) connector of the IC recorder with the USB port of your running
computer with the supplied USB connecting cable inserted into the connectors securely
until each plug stops to the end.
Make sure the IC recorder has been recognized properly.
While the IC recorder is connected to the computer, “Connecting” is displayed in the display
window of the IC recorder.
Go to the [Start] menu, click [Computer] (or [My Computer]), and then double-click [IC
RECORDER]
[FOR WINDOWS].
Double-click [SoundOrganizerInstaller_V140] (or [SoundOrganizerInstaller_V140.exe]).
Follow the instructions that appear on the screen.
Make sure that you accept the terms of the license agreement, select [I accept the terms
in the license agreement], and then click [Next].
When the [Setup Type] window appears, select [Standard] or [Custom], and then click
[Next].
Follow the instructions on the screen and set the installation settings when you select [Custom].
When the [Ready to Install the Program] window appears, click [Install].
The installation starts.
When the [Sound Organizer has been installed successfully.] window appears, check
[Launch Sound Organizer Now], and then click [Finish].
Note
You may need to restart your computer after installing Sound Organizer.
Note
If you format the built‑in memory, all data stored there will be erased. (The Help Guide and the Sound Organizer
software will also be erased.)
GB
ES