Aiphone MY-CU-PH/B - Manual

PHONE JACK TERMINAL BLOCK WIRING
With KX-TA62460 Doorphone card (Analog):
D1 = 1 (Green)
E = 2 (Red)
D2 = 3 (Black) E = 4 (Yellow)
With KX-TD160 Doorphone card (Digital):
D1 = 2 (Red)
E = 1 (Green)
D2 = 4 (Yellow) E = 3 (Black)
With KX-TD161 Doorphone card (Digital):
D1 = 1 (Green)
E = 2 (Red)
D2 = 4 (Yellow) E = 3 (Black)
- INSTRUCTIONS -
This monitor allows one or two MK video door stations to be used for video door answering, where the
communication is through a Panasonic® telephone system and the video appears on the Aiphone
monitor(s). The MY-CU-PH/B integrates MK PanTilt door stations with Panasonic's KX-T series
systems. (Works with KX-TA Advanced Hybrid series and KX-TD Digital Super Hybrid series.)
MY-CU-PH/B
Video Monitor
MK Video Door Answering with Panasonic® Phone System
MY-CU-PH/B TERMINAL DEFINITIONS:
1A1
2-Wire connection
1A2 for Door Station #1
2A1 2-Wire connection
2A2 for Door Station #2
B1 Video out to
B2 sub monitors
U1 Control wires
U2 Control wires
+ Positive 18V DC
- Negative
To Panasonic Phone System:
D1
Door 1 call-in & audio
D2 Door 2 call-in & audio
E Common audio
Special
Order
Products
WIRING DIAGRAM:
*VIDEO DOOR STATIONS:
Any Aiphone MK or MY Series video door
station can be used:
-MK-DAC: Surface mount, black
-MK-DBC: Semi-flush mount, black
-MK-DGC: Semi-flush mount, metal cover
-MK-DGV: Semi-flush mount, vandal
proof, stainless steel cover
-MK-DS/B: Surface mount, fixed camera,
Black
1A1
1A2
2A1
2A2
B1
B2
+
-
U1
U2
D1
E
D2
MY-CU-PH/B MK-DBC*
A1
A2
PS-1820UL
+
-
MK-DBC*
A1
A2
A1
A2
B1
B2
+
-
U1
U2
MYH-CU
B1
B2
A1
A2
+
-
U1
U2
MYH-CU
Pg. 1
1 2
3 4
Modular cord
from terminal
block to Door
Adaptor in
Panasonic KSU
DA1
DA2
+
-
DV+
DV-
MYW-MD/B
VIDEO OUTPUT TO CABLE
DISTRIBUTION OR CCTV MONITOR:
Use Aiphone MYW-MD/B Demodulator,
wired with 4 conductor, 18 AWG wire from
the MY-CU-PH/B monitor or last MYH-CU
in the system. Output is a standard 1V
peak-to-peak video signal.
Move jumper to
bottom 2 pins
Raw video output
DV+ to core of Coax
DV- to shield of coax
PS-1820UL
+
-
SPECIFICATIONS:
Power Source:
18V DC.
Use one PS-1820UL for every three monitors.
Consumption: MY-CU-PH/B Standby: 0.12A; Max. 0.9A
MYH-CU Standby: 0A; Max .4A
Communication: Through Panasonic® Telephone system
Hands free at door station
Calling: Monitors activate and Panasonic phones ring
Video Monitor: 4" direct view flat CRT
Scanning lines: 525 lines
Dimensions (HxWxD): 8-14"" x 6" x 2"
Weight:
MY-CU-PH/B: 2.2 lbs.
MYH-CU: 1.98 lbs
Updated 07/2002
(Analog wiring shown)