Selecting the input signal (input button), 10 selecting the input signal – Sony SDM-S204 User Manual
Page 10
Advertising
10
Selecting the input signal
(INPUT button)
Press the INPUT button.
The input signal change each time you press this button.
On-screen message
(Appears about 5 seconds on
the upper left corner.)
Input signal configuration
INPUT1 : HD15
HD15 input connector
(analog RGB) for INPUT1
INPUT2 : HD15
HD15 input connector
(analog RGB) for INPUT2
INPUT3 : DVI-D
DVI-D input connector
(digital RGB) for INPUT3
INPUT
Advertising