Sony SDM-S204 - Manual (Page 13)

13
GB
3 Press the m / M buttons to select “SMOOTHING” and
press the OK button.
The SMOOTHING menu appears on the screen.
4 Press the m / M buttons to select the desired mode.
The smoothing effect becomes stronger in the order of
TEXT
tSTANDARDtGRAPHICS.
• TEXT : To make the characters appear clear. (This mode is
suited for text-based applications.)
• STANDARD (The default setting) : Standard smoothing
effect.
• GRAPHICS : To make the pictures appear clean. (This
mode is suited for CD-ROM software such as
photo images or illustrations.)
Note
• When you set the (ZOOM) menu to REAL, the SMOOTHING
menu is not available.
• 1600
× 1200 resolution signals are shown only in REAL mode and
SMOOTHING is not possible.
SCREEN menu (analog RGB
signal only)
You can adjust the following items using the SCREEN menu.
• AUTO
• PHASE
• PITCH
• H CENTER
• V CENTER
x Automatic picture quality adjustment
function
When the monitor receives an input signal, it automatically
adjusts the picture’s position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (page 18).
Note
While the automatic picture quality adjustment function is activated, only
the 1 (power) switch will operate.
If the automatic picture quality adjustment function of this
monitor seems not to completely adjust the picture
You can make further automatic adjustment of the picture quality for the
current input signal (See “AUTO” below).
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture’s sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the monitor receives a previously input and
registered input signal.
x Make further automatic adjustments to the
picture quality for the current input signal
(AUTO)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m / M buttons to select (SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
3 Press the m / M buttons to select “AUTO” and press
the OK button.
Make the appropriate adjustments of the screen’s phase, pitch
and horizontal/vertical position for the current input signal
and store them.
x Adjust the picture’s sharpness manually
(Phase/Pitch)
You can adjust the picture’s sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).
1 Set the resolution to 1600
×
1200 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM, select the area and model, and
display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4 Press the MENU button.
The main menu appears on the screen.
5 Press the m / M buttons to select (SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
6 Press the m / M buttons to select “PHASE” and press
the OK button.
The “PHASE” adjustment menu appears on the screen.
7 Press the m / M buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the pitch using the following procedures.
Note
When receiving digital RGB signals from the DVI-D input connector,
adjustment is unnecessary.
1 6 0 0 1 2 0 0 6 0 H z x /
E X I T
AU TO
P H A S E
P T C H
H C E N T E R
V C E N T E R
S C R E E N
I