Sony SDM-S204 - Manual (Page 23)

23
GB
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size: 20.1 inch (51 cm)
Input signal format
RGB operating frequency*
Horizontal: 28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution
Horizontal: Max.1600 dots
Vertical: Max.1200 lines
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75
Ω, positive
SYNC signal:
TTL level, 2.2 k
Ω, positive or negative (Separate
horizontal and vertical, or composite sync)
0.3 Vp-p, 75
Ω, negative (Sync on green)
Digital RGB (DVI) signal: TMDS (Single link)
Power requirements
100–240 V, 50–60 Hz, Max. 1.2 A
Power consumption
Max. 58W
Operating temperature
5–35 ° C
Dimensions (width/height/depth)
Display (upright):
Approx. 440.5
Ч 447.5 Ч 234 mm (with stand)
(17
3
/ 8
Ч 17 5
/ 8
Ч 9 1
/ 4 inches)
Approx. 440.5
Ч 354.5 Ч 72.5 mm (without stand)
(17 3 / 8
Ч 14 Ч 2 7 / 8 inches)
Mass
Approx. 7.6 kg (16 lb 12 oz) (with stand)
Approx. 6.2 kg (13 lb 11 oz) (without stand)
Plug & Play
DDC2B
Accessories
See page 6.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.