Setup 3:bundle the cords and cables, Setup 4:turn on the monitor and computer, 8setup 3: bundle the cords and cables – Sony SDM-S204 User Manual

Page 8: Setup 4: turn on the monitor and computer

Advertising
background image

8

Setup 3: Bundle the cords and

cables

1

Slide up the back cover.

2

Remove the stand cover.

3

Secure the video signal cables using the cable
holder on the cabinet.

4

Feed the power cord through the hole on the left of
the stand and secure the power cord and video
signal cables using the cable holder.

5

Replace the stand cover and then slide down the
back cover.

Please be sure that cords come out through the opening at the
bottom of the stand cover, for proper placement of the stand
cover.

Setup 4: Turn on the monitor and

computer

1

Press the MAIN POWER switch located on the right
side of the monitor in the direction of the

[

, if it is not

already pressed. Make sure the

1

(power) indicator

is lit in red.

Note

The monitor is factory shipped with the MAIN POWER switch set
to on ([).

2

Press the

1

(power) switch on the front right of the

monitor.

The 1 (power) indicator lights up in green.

3

Turn on the computer.

4

Press the INPUT button to select the desired input
signal.

The selected input’s picture appears on the screen.
For more information, see “Selecting the input signal (INPUT
button)” on page 10.

The installation of your monitor is complete. If necessary, use the
monitor’s controls to adjust the picture (page 11).

back cover

2

1

4

5

3

cable holder

stand
cover

5

MAIN POWER

lights in red

lights in green

INPUT

Advertising