Sony NWZ-X1051F - Manual (Page 117)

Using Noise Canceling Function
NWZ-X1050 / X1051 / X1060 / X1061 .GB.4-141-609-11(1)
11 11
Set Noise Cancel Level
The player is designed to obtain the maximum effect of the Noise Canceling
function ( page 110). However, you may be able to enhance the effect
depending on your ear shape or usage environment by increasing (or
decreasing) the sensitivity of the microphone installed in the headphones.
You can adjust the microphone sensitivity by setting the Noise Cancel level.
Adjust the function when the Noise Canceling effect is poor.

From the Home menu, select (Settings)  “NC Settings”  “Set
Noise Cancel Level.”

Drag the indicator (setting value) to select the desired value.
The setting can be adjusted in 31 steps. The center position of the slider
will obtain the maximum effect. Move the position of the slider to the left
or right to adjust the desired value.

Select “OK.”

Hint
 You can also adjust the setting from the Noise Cancellation screen, by selecting
(Option Menu)  “Set Noise Cancel Level.”
Notes
 This function is only effective when the NOISE CANCELING switch is turned on.
 The default setting (center position of slider) will obtain the maximum effect. The effect
of the Noise Canceling function is not necessarily enhanced by maximizing the
microphone sensitivity.
Table of
Cont
ents
Inde
x