Listening to multi channel sound, Multi ch in, Listening to fm/am radio – Sony HT-9900M User Manual

Page 24: When multi channel decoding indicator lights up, Automatic tuning

Advertising
background image

masterpage:Left

lename[E:\SEM_Janet\Revision_HT-

950DP\J9050000_25497361215950DPUS\2549736121\US04BSC_HT-5950DP-CA.fm]

24

US

Model name [HT-5950DP/HT-6900DP/HT-9900M/HT-9950M]

[2--549-736-12(1)]

(HT-9950M, HT-9900M and
HT-6900DP only)

You can select the audio directly from the
components connected to the MULTI CH IN
jacks. This enables you to enjoy high quality
analog inputs such as DVD or Super Audio CD.
When MULTI CH IN is selected, the tone and
sound field cannot be used.

Press MULTI CH IN.

Press again to cancel the MULTI CH IN
function.

Note

To optimize the sound balance of this system, we
recommend that you set the speaker configuration of
your DVD or Super Audio CD player as follows:

When MULTI CHANNEL
DECODING indicator lights up

The MULTI CHANNEL DECODING indicator
lights up when the receiver is decoding multi
channel sources.
However, this indicator does not light up if you
select 2CH STEREO mode.

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and AM
antennas to the receiver (see page 14).

Tip

The tuning scale differs depending on the area code as
shown in the following table. For details on area codes,
see page 3.

* The AM tuning scale can be changed (see page 56).

Automatic tuning

If you do not know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.

1

Press FM or AM to select the FM or AM
band.

The last received station is tuned in.

2

Press TUNING + or TUNING –.

Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.

Tip

If “STEREO” flashes in the display and the FM stereo
reception is poor, press FM MODE to change to
monaural (MONO). You will not be able to enjoy the
stereo effect, but the sound will be less distorted. To
return to stereo mode, press FM MODE again.

Listening to multi channel
sound

— MULTI CH IN

Speaker type

Settings

FRONT

SMALL

CENTER

SMALL

SURROUND/REAR

SMALL

SUB WOOFER

YES

Listening to FM/AM radio

Area code

FM

AM

U, CA

100 kHz

10 kHz*

US01COV_HT-5950DP-CA.book Page 24 Monday, April 11, 2005 11:37 AM

Advertising
This manual is related to the following products: