Changing the factory setting of an input button, Changing the factory setting of an, Input button – Sony STR-DE597 User Manual
Page 45
Op
eratio
ns Usin
g t
h
e Remote RM-U306B
masterpage:Right
lename[C:\Data\Sony SEM_Janet\STR-
DE597_Data\J904000_4252271121DE597UCA\4252271121\4252271121DE597UCA\GB08RE
M_STR-DE597-UCA.fm]
45
GB
model name1[STR-DE597]
[4-252-271-12(1)]
If the factory settings of the input buttons do not
match your system components, you can change
them. For example, if you have a tape deck and
you do not have an MD deck, you can assign the
MD/TAPE button to your tape deck.
Note that the settings of the TUNER button
cannot be changed.
1
Hold down the input button whose
input you want to change (for example,
MD/TAPE).
2
Press the corresponding button of the
component you want to assign to the
input button (for example, 4 – Tape
deck).
The following buttons are assigned to select
the input:
*Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
To reset a button to its factory
setting
Repeat the above procedure.
To reset all the input buttons to
their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the
same time.
Changing the factory
setting of an input button
To operate
Press
CD player
1
DAT deck
2
MD deck
3
Tape deck A
4
Tape deck B
5
LD player
6
VCR (command mode VTR 1*)
7
VCR (command mode VTR 2*)
8
VCR (command mode VTR 3*)
9
TV
0
DSS (Digital Satellite Receiver)
>10
DVD player
ENTER
VCD player
.
GB01COV_STR-DE597-UCA.book Page 45 Monday, March 8, 2004 12:15 PM