Sony VGC-RA825GY - Manual (Page 95)

Using the RAID Configuration Wizard
The RAID Configuration Wizard can configure two installed hard disk drives for RAID-0 or RAID-1 levels. You can also use the
RAID Configuration Wizard to change your computer's RAID array to RAID-0 or RAID-1.
1. Press the power switch on the computer to turn on the computer.
2. Open the optical drive, and place the Startup Recovery Disc from the Recovery Media Kit into either optical
drive.
3. Close the drive and turn off your computer.
4. Wait approximately 30 seconds, and then turn on the computer again.
5. When prompted, insert Recovery Disk 1 into the optical drive, and then click OK.
The VAIO Recovery Wizard appears.
6. Click Next.
7. Select Custom Recovery (for Advanced Users), and click Next.
8. Select RAID Configuration, and click Next.
The RAID Configuration Wizard appears.
RAID Configuration Wizard
9. Click Next. The RAID Configuration Options window appears.
RAID Configuration Options
Page 95