Sony KDL-46SL140 - Manual (Page 18)

18
4. Setting Up the Channel List -
Initial Setup
After you finish connecting your TV, you need to
run Initial Setup, which automatically sets up
available channels. The Initial Setup screen
appears when you turn on your TV for the first
time. If you do not want to set up the channels at
this time, you can do it later by selecting the Auto
Program option in the Channel menu (see page
34).
1 Press to turn on the TV.
The Initial Setup screen appears.
2 Press V/v to highlight the desired language,
then press .
3 Connect cable or antenna, then select Yes to
run Auto Program.
~
• If you want to run Auto Program at a later time,
select No.
• If you have cable and antenna available, please
connect cable first.
• IMPORTANT: You must perform Auto Program
after the cable or antenna is connected. If you
cancel
Auto Program before completion some
channels may not be available.
4 Follow the help text provided on the screen to
run Auto Program. The Auto Program will
scan for available channels from the signal
source directly connected to the TV’s
CABLE/ANTENNA input.
5 When the Auto Program is complete, select
OK to finish the Auto Program process.
To run Auto Program at a later time
❑ Use the Auto Program feature at Channel
menu as described on page 34.
To display the picture in your preferred
aspect ratio
❑ Select the proper Wide Mode as described on
pages 23 and 32.
~
• You may want to set up convenient features such as
Favorites (see page 28, 34), Show/Hide Channels
(see page 34), Label Channels (see page 34) when
Auto Program is completed.
POWER
Please select your language:
Press to choose a language.
Initial Setup