Sony HDR-PJ580V - Manual (Page 39)

Built-in USB Cable
Memory card access lamp
Tripod receptacle
Attach a tripod (sold separately: the length of the screw must be less than 5.5 mm (7/32 in.))
Memory card slot
BATT (battery) release lever
To fasten the grip belt
To attach the lens hood (HDR-CX580V/PJ580/PJ580V/PJ600/PJ600V)
Align the lens hood with the camcorder properly, then turn the securing ring of the lens hood in the
direction of the arrow.
When attaching the lens hood, align the opening section of the lens hood with the flash-emitting
section of the camcorder properly.
A: Securing ring
To remove the lens hood, turn the securing ring of the lens hood in the opposite direction from that of
the arrow.
Remove the lens hood when you operate the camcorder with the supplied remote commander.
Wireless Remote Commander (HDR-
PJ260/PJ260V/PJ580/PJ580V/PJ600/PJ600V)
The wireless remote commander is useful when you use the projector.
30