Setting a screensaver type, Screensaver – Sony NWZ-S716FSNC User Manual
Page 82
NWZ-S715F/S716F/S718F.GB.3-294-618-11(1)
Settings
Setting a Screensaver Type
You can set the screensaver to either a “Clock” or “Blank” for when there is no
operation for a while during song playback or FM reception. You can also select
“None” for no screensaver.
Settings
5-way button
BACK/HOME
button
Press and hold the BACK/HOME button until the Home menu appears.
Press the /// button to select (Settings), and then press
the
button to confirm.
Press the /// button to select “Common Settings,” and then
press the
button to confirm.
The list of “Common Settings” appears.
Press the /// button to select “Screensaver,” and then press
the
button to confirm.
Press the /// button to select “Type,” and then press the
button to confirm.
The list of screensaver type appears.
Press the /// button to select a desired type, and then press
the
button to confirm.
After confirming, the screen in step
appears again.
Clock: When there is no operation for a while, a clock appears as a
screensaver. (Default setting)
Blank: When there is no operation for a while, the screen goes off.
None: The screen does not change to a screensaver.
Hint
While characters are scrolling on the screen, the screen does not change to the
screensaver.
Table of
Cont
ents
Menu
Inde
x