Sony PEG-NZ90 - Manual (Page 102)

102 Exchanging and updating data using a HotSync
®
operation
(Other HotSync
®
operations)
Customizing HotSync
®
Manager startup and
HotSync
®
setup options
1
Click the HotSync icon in the Windows task tray and
select Setup from the shortcut menu.
The Setup dialog box is displayed.
2
Click the General tab and select the setting as needed.
If you are not sure which option to use, select Always available .
• Always available:
Starts the HotSync
®
Manager when Windows
starts. This allows you to perform a HotSync
®
operation even when the
Palm™ Desktop for CLIÉ software is not running.
• Available only when the Palm™ Desktop is running:
Starts the
HotSync
®
Manager when you start the Palm™ Desktop for CLIÉ
software.
• Manual:
Starts the HotSync
®
Manager only when you select
HotSync
®
Manager
from the Windows
Start
menu.
3
Click the Local tab and adjust the setting for the connection
between the computer and cradle as needed.
• Serial port:
Specifies the computer port that is used for a HotSync
®
operation. Make sure that the serial port for HotSync
®
is not shared with
the port for modem.
• Speed:
Determines the speed at which data is transferred. Try the
As
Fast As Possible rate first, and adjust downward if you have any
problems.
4
Click the Modem tab and select the setting for the modem
as needed.
b
For details, refer to “Performing a HotSync
®
operation via a modem” on page
110.
5
Click the Network tab and select the setting for the network
as needed.
6
Click OK to finish.