Sony PEG-NZ90 - Manual (Page 60)

Exchanging and updating data using a HotSync
®
operation 60
Performing a HotSync
®
operation
To perform a HotSync
®
operation, the Palm™ Desktop for
CLIÉ software must be installed on your computer and the cradle
should be connected to the computer.
b
For details on how to prepare for a HotSync
®
operation, follow the
procedure as described in “Using your CLIÉ handheld with your
computer” in the “Read This First (Operating Instructions).”
Performing a HotSync
®
operation with the cradle
(Local HotSync
®
)
Performing a HotSync
®
operation with the cradle is called a
Local HotSync
®
.
1
Place your CLIÉ handheld in the cradle.
2
Press the HotSync button on the cradle.
The HotSync
®
operation starts.
When the HotSync
®
operation is complete, a message
showing the HotSync
®
completion is displayed on your
CLIÉ handheld.
(Location of the HotSync
button may vary
depending on your
model.)
Continued on next page
• • • • • • • • • • • • • • • • • • •