Adding detailed information to a service template – Sony PEG-NZ90 User Manual

Page 90

Advertising
background image

Customizing your Sony CLIÉ™ handheld (Preferences)

90

Changing the Network preferences

3

Change the following settings if necessary:

1

Enter the telephone number used to access the modem.
If necessary, enter a dial prefix (such as “9”) to access an outside line,
and tap the

Dial prefix

check box. You can enter a comma in the field

to introduce a “pause” in the dialing sequence. Each comma equals a
two second pause.

2

If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the

Disable call waiting

check box to avoid an

interruption during a modem HotSync

®

operation.

Note

Each telephone company assigns a code to disable Call Waiting. Contact your
local telephone company for the code you need.

3

If you want to use a calling card to place the call, select the

Use

calling card

check box and enter the calling card number.

Tip

There is usually a delay before you enter your calling card number.
Consequently, add at least three commas before your calling card number to
compensate for the delay.

4

Tap OK.

Adding detailed information to a service template

If you are using one of the predefined service templates, you probably only
need to enter your user name and telephone number. If you are creating a new
service template, you may need to provide additional information to your ISP
or dial-in server. Use the

Details

dialog box to add additional information to

a selected service template.

To select a connection type

1

On the Network Preferences screen, tap the service field.

2

Tap Details.

The

Details

screen is displayed.

Continued on next page

• • • • • • • • • • • • • • • • • • •

Advertising