Sony PEG-NZ90 - Manual (Page 95)

Customizing your Sony CLIÉ™ handheld (Preferences) 95
Changing the Network preferences
Non-ASCII Characters for Log-in Scripts
The following information enables you to create custom log-in scripts that
require non-ASCII characters. It is provided for advanced users who
understand the use and requirements of such characters in a custom log-in
script.
Use of ^char
You may use the caret ( ^ ) to transmit ASCII command characters. If you send
^char, and the ASCII value of character is between @ and _, then the character
is automatically translated to a single-byte value between 0 and 31.
For example, ^M is converted to a carriage return.
If character is a value between A and Z, then the character sequence is
translated to a single-byte value between 1 and 26. If character is any other
value, then the character sequence is not subject to any special processing. For
example, the string “Joe^M” transmits Joe, followed by a carriage return.
Carriage return and line feed
You may include carriage return and line feed commands as part of the log-in
script, when they are entered in the following format.
• < cr > : Sends or receives a carriage return
• < lf > : Sends or receives a line feed
For example, the string “waitfor Joe<cr><lf>” waits to receive Joe followed by
a carriage return and line feed from the remote computer before executing the
next command in the script.
Literal characters
The backslash ( \ ) character defines that the next character is transmitted as a
literal character, and is not subject to any special processing ordinarily
associated with that character.
Examples:
• \^ : Includes a caret as part of the string
• \< : Includes a < as part of the string
• \ \ : Includes a backslash as part of the string