Sony PCG-VX89P - Manual (Page 58)

VAIO Computer Quick Start
58
See the manual that accompanied your optical drive for more information on its
installation and use.
To disconnect the PC Card drive
1 Close any active programs to help prevent data loss.
2 Double-click the Safely Remove Hardware icon on the taskbar. The
Safely Remove Hardware window appears.
3 Select the PC Card drive on the Hardware devices window, if it is not
already selected, and click Stop. The Stop a Hardware device window
appears.
4 Select the PC Card drive, and click OK. A message appears stating it is now
safe to remove the hardware device.
5 Disconnect the PC Card drive from the computer.
Frequently asked questions
Why isn’t my i.LINK drive playing a CD or DVD properly?
The i.LINK optical drive will not play a CD or DVD if the disc was inserted with
the label facing down. Eject the CD or DVD from the drive, and make sure the
label is facing up. The disc will also not play properly under the following
circumstances:
❑ The disc requires a particular software that is not already installed on your
computer. Install that software according to the manufacturer’s instructions.
❑ The DVD is not compatible with the optical drive and a region code warning
appears when you try to play it. Make sure the region code listed on the
DVD package is compatible with the drive.
✍
Remove the protective cover that is attached to the lens of the optical drive before you
use the drive. See “Inserting and Ejecting CDs or DVDs” for information on how to
open the optical drive to access the lens.