Sony SA-NS310 - Manual (Page 15)

15 GB
G
e
ttin
g
S
ta
rte
d
Bottom
For details on each indicator, see “Indicator information” (page 47).
K NETWORK STANDBY / STANDBY
switch
Switch between the network standby mode
and the standby mode (page 19).
L WPS button
Use to make the network settings for the
WPS push button configuration (page 23).
M UPDATE button, indicator
Press to start updating the software of the
unit (page 36).
Indicates the update status of the unit.
Green (lit): The unit can be updated.
Green (flashing): The unit is updating.
Red (flashing): An error has occurred.
Not lit: The unit does not need updating.
N ALL RESET button
Press and hold until all indicators light
while the unit is being turned on and reset
to its factory default settings.
Use a thin object, such as a small pin.
The previously registered settings or
information will be reset.
Note
Network settings are also reset when you
press ALL RESET button.