Running initial setup, Detaching the table-top stand from the tv – Sony KDL-52NX800 User Manual

Page 15

Advertising
background image

15

Se
tting

up y

our TV

Running initial setup

1

Complete your cable connections
before proceeding with the Initial
Setup
.
Connect the TV to your nearest power
outlet.

2

Check the ENERGY SAVING
SWITCH
setting is on (z).

3

Press 1 (POWER) on the TV.
When you switch the TV on for the
first time, the Language menu
appears on the screen.

~
• The TV image shown here may differ from

your TV but the operation of your TV remains
the same as indicated.

4

Follow the instructions on the screen.

~
• The ENERGY SAVING SWITCH must be on

(z) to set the clock and obtain program
information for the TV Guide.

Home mode sets the TV to display the settings

optimized for home viewing (this setting is
ENERGY STAR compliant).

5

Select Continue to scan for available
channels and enable the TV Guide
On Screen

®

feature. If you receive

channels from a cable box or satellite
receiver and do not wish to use the
TV’s built-in tuner, select Skip.
Selecting Skip will disable the TV
Guide On Screen
feature, which is
only available when the TV’s tuner is
used.

~
• If you skip the channel scan while in the setup

menus, TV Guide will be disabled.

Detaching the Table-Top
Stand from the TV

Remove only the screws marked with

on

the TV.

~

• Do not remove the Table-Top Stand for any

reason other than to install corresponding
accessories on the TV.

For KDL-60NX801, KDL-60/52/
46NX800 and KDL-46/40NX700

~

• The NX801/NX800/NX700 series models

must remove the stand rear cover prior to
detaching the Table-Top Stand.

• When installing the TV on a wall, remove the

four screws from the rear of the TV. (They are
fastened in the screw holes for wall mounting.)
Be sure to store the removed screws in a safe
place, keeping them away from children
(except KDL-46/40NX700).

• When attaching the Table-Top Stand again, be

sure to fasten the four screws (previously
removed) to the original holes on the rear of
the TV (except KDL-46/40NX700).

For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and
KDL-46/40NX710

KDL-60NX810

Joint

Advertising