Adjusting the speaker levels and balance, Test tone, Adjusting the speaker levels and – Sony HT-4850DP User Manual

Page 17: Balance — test tone, Adjusting the level

Advertising
background image

Gettin

g

Star

ted

masterpage:Right

lename[C:\Documents and

Settings\pc13\Desktop\J9031708_4252085411HT5800DPUS\4252085411\GB03CON_HT-

800DP-US.fm]

17

US

model name1[HT-5800DP]

model name2[HT-4850DP]

model name3[HT-4800DP]

[4-252-085-41(1)]

Adjusting the level

Slight adjustments to the system can enhance
your sound enjoyment.

HT-5800DP only

HT-4850DP and HT-4800DP only

Turn LEVEL to adjust the volume.

Set the volume level to best suit your preference
according to the program source.

Note

Do not set the volume of the sub woofer to maximum.
Extraneous noise may be heard.

Adjust the speaker levels and balance while
listening to the test tone from your listening
position. Use the remote for the operation.

Tip

The receiver employs a test tone with a frequency
centered at 800 Hz.

1

Press ?/1 to turn on the receiver.

2

Press TEST TONE.

“T. TONE” appears in the display and the
test tone is output from each speaker in
sequence.
Front (left)

t Center t Front (right) t

Surround (right)

t Surround (left) t

Sub woofer

3

Adjust the speaker levels and balance
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.

For details on the LEVEL menu settings,
see page 26.

Tips

• To adjust the level of all speakers at the same

time, press MASTER VOL +/– on the remote or
turn MASTER VOLUME –/+ on the receiver.

• The adjusted value are shown in the display

during adjustment.

4

Press TEST TONE again after
adjustment.

The test tone turns off.

Notes

• Although these adjustments can also be made via the

front panel using the LEVEL menu (when the test
tone is output, the receiver switches to the LEVEL
menu automatically), we recommend you follow the
procedure described above and adjust the speaker
levels from your listening position using the remote.

• The bass redirection circuitry is always active, so you

may hear some sound output from the sub woofer
when test tone is output from other speakers.
However, this is not a malfunction.

INPUT

LEVEL

LEVEL

LEVEL

7: Adjusting the speaker
levels and balance

— TEST TONE

GB01COV_HT-5800DP-US.book Page 17 Wednesday, March 17, 2004 5:48 PM

Advertising
This manual is related to the following products: