Tuning to a station directly (direct tuning), Help guide – Sony STR-DN1050 User Manual
Page 137
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Tuning to a station directly (Direct Tuning)
You can enter the frequency of a station directly.
1. Select [Listen] - [FM TUNER] or [AM TUNER] from the home menu.
2. Press .
3. Enter the frequency using / / / .
i. Press / to select a digit.
ii. Press / to change the digit.
4. Press .
Note
If the tuned frequency is invalid or out of range, [---.-- MHz] or [---- kHz] appears and then the screen returns to the
current frequency.
Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still cannot tune to a station, the
frequency may not be in use in your area.
Hint
Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station.
The tuning scale for direct tuning is shown below:
USA and Canada
FM: 100 kHz
AM: 10 kHz (*)
Mexico
FM: 50 kHz
AM: 10 kHz (*)
Europe and Australia
FM: 50 kHz
AM: 9 kHz
*
The AM tuning scale can be changed. For details, see “
Changing the AM tuning scale (for USA, Canadian, and Mexican
.”
4-488-938-11(1)
126