System requirements for a wired lan connection, Help guide – Sony STR-DN1050 User Manual
Page 149
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
System requirements for a wired LAN connection
The following system environment is required to use the network function of the receiver via a wired LAN connection.
Broadband connection
A broadband connection to the Internet is required in order to listen to the music services and to update the software of
the receiver.
Router
Use a router compatible with transmission speeds of 100 Mbps or greater to enjoy content on your home network.
We recommend that you use a router equipped with a built-in DHCP (Dynamic Host Configuration Protocol) server.
This function automatically assigns IP addresses to devices on the LAN.
LAN cable (CAT5)
We recommend using a normal shielded type cable for a wired LAN to avoid electric noise.
Some flat-type LAN cables are easily affected by noise.
Server
A server is a device which delivers music content to a DLNA device on a home network. A device that can be used as a
server (a computer, etc.) must be connected to your wireless or wired LAN home network.
4-488-938-11(1)
Copyright 2014 Sony Corporation
138