Sony STR-DN1050 - Manual (Page 150)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting up a wired LAN connection
You can set up a wired LAN connection by the following procedure.
1. Select [Settings] - [Network Settings] from the home menu.
2. Select [Internet Settings].
3. Select [Wired] (*).
The screen for selecting the IP address acquisition method is displayed on the TV screen.
* You cannot select [Wired] if a LAN cable is not connected to the receiver.
4. Select [Auto].
5. Select [OK].
The receiver starts connecting to the network. For details, refer to the messages that appear on the TV screen.
If using a fixed IP address
Select [Manual] in step 4. The IP address input display appears on the TV screen.
Enter the value for [IP Address] using the on-screen keyboard. Press / / / and to select the characters one
by one, then select [Enter] to confirm the values.
Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS], then select [Next].
Hint
See [Information] when checking the network settings.
Related Topic
Connecting the receiver to the network using a LAN cable (for wired LAN connections only)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
139