Sony STR-DN1050 - Manual (Page 182)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Enjoying sound of TV broadcasts from the receiver
If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to output the
sound of the TV from the speakers connected to the receiver.
1. Select [Settings] - [HDMI Settings] from the home menu.
2. Select [Control for HDMI].
3. Select [On].
If you connect to a TV that is not compatible with the Audio Return Channel (ARC) function
or you want to select an audio signal using a cable other than an HDMI cable (e.g. via an
optical digital cable or an audio cable)
Switch the audio input mode. For details, see “ Switching between digital and analog audio (Input Mode) .”
Note
Be sure to turn off the volume of the TV or activate the muting function of the TV.
If your TV does not support the System Audio Control function, set [Audio Out] to [TV+AMP] in the HDMI Settings
menu to output the sound of the TV from the TV speaker and the speakers connected to the receiver.
Related Topic
Switching between digital and analog audio (Input Mode)
Connecting a TV (for STR-DN1050)
Connecting a TV (for STR-DN850)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
171