Dn1050 only), Help guide – Sony STR-DN1050 User Manual
Page 183
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Switching the monitors that output the HDMI video signals (for STR-DN1050 only)
If you have connected two monitors to the HDMI OUT A and HDMI OUT B jacks, you can switch the output for these two
monitors using the HDMI OUTPUT button on the remote control.
1. Turn on the receiver and the two monitors.
2. Press HDMI OUTPUT.
Each time you press the button, the output will be switched as follows:
HDMI A - HDMI B - HDMI A + B - HDMI OFF
Note
[HDMI A + B] may not work if the compatible video formats of the monitors connected to the HDMI OUT A jack and
the HDMI OUT B jack of the receiver are different.
[HDMI A + B] may not work depending on the playback device you connect.
4-488-938-11(1)
Copyright 2014 Sony Corporation
172