Sony STR-DN1050 - Manual (Page 203)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Setting the crossover frequency of the speakers (Crossover Frequency)
You can set the bass crossover frequency of speakers for which the speaker size has been set to [Small] in the Speaker
Settings menu. A measured speaker crossover frequency is set for each speaker after the Auto Calibration is performed.
1. Select [Settings] - [Speaker Settings] from the home menu.
2. Select [Crossover Frequency].
3. Select the speaker for which you want to adjust the crossover frequency on the screen.
4. Press / to set the crossover frequency.
Note
This function does not work when headphones are connected.
The surround back speakers will be set to the same setting as that of the surround speakers.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
192