Sony STR-DN1050 - Manual (Page 204)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Outputting a test tone from each speaker (Test Tone)
You can output a test tone from each speaker in sequence.
1. Select [Settings] - [Speaker Settings] from the home menu.
2. Select [Test Tone].
3. Select the setting you want.
Off
Auto: The test tone is output from each speaker in sequence.
L, C, R, SR, SL, SB (*), SBL, SBR, FHL, FHR, SW: You can select which speakers will output the test
tone.
* [SB] appears when only one surround back speaker is connected.
4. Adjust the speaker level.
Hint
To adjust the level of all speakers at the same time, press +/–. You can also use MASTER VOLUME on the
receiver.
The adjusted value is shown on the TV screen during adjustment.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
193