Sony STR-DN1050 - Manual (Page 284)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
No image is output from the TV when the receiver is in standby mode.
When the receiver enters standby mode, the image from the last HDMI device selected before you turned off the
receiver is displayed. If you are enjoying content from another device, play the content on the device and perform the
One-Touch Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content.
Make sure [Pass Through] is set to [On] (For USA, Canadian, Mexican, and Australian models only) or [Auto] in the
HDMI Settings menu.
Related Topic
Passing HDMI signals through (Pass Through)
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
273