Sony STR-DN1050 - Manual (Page 90)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Using HDMI connections
High-Definition Multimedia Interface (HDMI) is an interface that transmits video and audio signals in digital format.
Connecting Sony “BRAVIA” Sync-compatible devices using HDMI cables simplifies operations. See “
Interlocking other
devices using an HDMI connection (“BRAVIA” Sync) .”
HDMI features
Digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver. This signal
supports Dolby Digital, DTS, DSD, and Linear PCM. For details, see “
Digital audio formats supported by the receiver .”
The receiver can receive Multi Channel Linear PCM (up to 8 channels) with a sampling frequency of 192 kHz or less
via an HDMI connection.
Analog video signals input to the receiver’s VIDEO jack or COMPONENT VIDEO jacks can be output as HDMI signals
(for STR-DN1050 only). Audio signals are not output from the HDMI OUT jack(s) while the image is being converted.
This receiver supports High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), Deep Color (Deep Colour),
“x.v.Color (x.v.Colour),” and 4K or 3D transmission.
To enjoy 3D images, connect a 3D-compatible TV and video device (Blu-ray Disc player, Blu-ray Disc recorder,
PlayStation 3, etc.) to the receiver using High Speed HDMI cables, put on 3D glasses, and then play 3D-compatible
content.
To enjoy 4K (HDMI BD/DVD, GAME, SAT/CATV, VIDEO1) images, connect a 4K-compatible TV or video device (Blu-
ray Disc player, etc.) to the receiver using High Speed HDMI cables, and then play 4K-compatible content (for STR-
DN1050 only).
Note
Depending on the TV or video device, 4K or 3D images may not be displayed. Check the HDMI video formats
supported by the receiver.
Refer to the operating instructions of each connected device for details.
Notes on use
4-488-938-11(1)
Copyright 2014 Sony Corporation
Help Guide
79