Connecting speakers, Help guide – Sony STR-DN1050 User Manual
Page 93
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Connecting speakers
Connect each speaker as illustrated below.
Be sure to disconnect the AC power cord (mains lead) before connecting cables.
For details on how to connect speaker cables to the receiver, see “
Monaural audio cable (not supplied)
Speaker cable (not supplied)
*1
If you connect a subwoofer with an auto standby function, turn off this function when watching movies. If the auto standby
function is turned on, it switches to standby mode automatically based on the level of the input signal to the subwoofer, and the
sound may not be output.
*2
Notes on connections to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals
If connecting only one surround back speaker, connect it to the L (+/-) terminals.
If you have an additional front speaker system, connect it to these terminals. In this case, perform the following
procedure:
1. Select [Speaker Connection] in the Speaker Settings menu, then select a speaker pattern that does not have
surround back and front high speakers.
82