Sony DSLR-A580L - Manual (Page 171)

171
Printing images
Printing images
Specifying DPOF
Using the camera, you can specify the still images and the number of
images to print before you print images at a shop or with your printer.
Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Specifying /unspecifying DPOF on selected images
1
MENU button t 1 t [Specify Printing] t [DPOF Setup]
t [Multiple Img.]
2
Select the image with b/B on the controller.
3
Select the number of sheets with the center of the controller.
• To unspecify DPOF, set the number to “0.”
4
Press the MENU button.
5
Select [Enter] with v, then press the center of the controller.