Turning the photo frame on, Turning on the power, Turning off the power – Sony DPF-D1010 User Manual

Page 11

Advertising
background image

11

GB

Basi

c ope

rati

ons

2

Pull the battery holder out.

3

Insert a new battery and slide the
battery holder back into the remote
control.

Insert the battery so that “+” is facing
upwards.

Notes

• Using a battery other than the specified one may

result in the battery rupturing.

• Dispose of used batteries as specified by the local

authorities.

• Do not leave the remote control in a very hot and

humid place.

• Take care that no foreign objects get inside the

remote control when you, for example, replace the
battery.

• Incorrect use of the battery may cause leaking and

corrosion.

– Do not recharge the battery.

– When the remote control will not be used for a

long period of time, remove the battery from the
remote control to prevent leaking and corrosion.

– Incorrectly inserting, shorting, dismantling, or

heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.

Turning the photo frame
on

When you have already turned on your photo
frame by connecting it to the AC power source,
skip to the next section.

Turning on the power

Press 1 (on/standby) on the photo frame to
turn on the power. The standby indicator turns
to green from red. The Sony logo on the front
panel lights up.

Using the remote control (except for
DPF-A700/D700)

You can turn on/off the photo frame with the 1
(on/standby) button on the remote control.

Turning off the power

Hold 1 (on/standby) on the photo frame until
the power turns off. The standby indicator turns
to red from green.

Note

Do not turn the photo frame off or disconnect the AC
adaptor from an AC outlet or the photo frame. Doing
so may damage the photo frame.

Continued

Advertising
This manual is related to the following products: