Audio, Channels – Sony KDF-55WF655 User Manual
Page 124
Other Information
124
KDF-WE/WF655
2-059-370-12 (1)
Audio
Channels
Problem
Possible Remedies
Good picture, no sound
❏
Press
MUTING
so that
Muting
disappears from the screen (see page 60).
❏
Make sure the
Speaker
option is set to
On
in the Audio menu (see page 103).
❏
Make sure the
MTS
option is set to
Stereo
or
Mono
Audio noise
❏
Communication problems may occur if infrared communication equipment (e.g.,
infrared cordless headphones) is used near the LCD projection TV. Please use
headphones other than infrared cordless headphones. Also, if you use infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the LCD projection TV until the noise is
eliminated, or move the transmitter and receiver of the infrared communication
equipment closer together.
Cannot gain enough volume
when using a cable box
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press
FUNCTION
once, and the LCD projection TV indicator lights up and
adjust the LCD projection TV’s volume.
Sound seems weak or
insufficient
❏
The LCD projection TV’s audio might be set to
Auto SAP
or
Mono
, when it
might be better set to
Stereo
. In the Audio menu (see page 103), set the
MTS
setting to
Stereo
. If already set to
Stereo
, switch to
Mono
(which may reduce
background noise during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
If the
Speaker
option is set to
Off
and the
Audio Out
option is set to
Fixed
(in
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 103). Or, to use the LCD projection TV remote control, set
the
Audio Out
option to
Variable
.
❏
To turn on the LCD projection TV speakers, set the
Speaker
option to
On
(see
Problem
Possible Remedies
Cannot receive upper channels
(UHF) when using an antenna
❏
Press
ANT
to select the VHF/UHF input (see page 61).
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the LCD projection TV’s memory (see page 106).
TV is fixed to one channel
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the LCD projection TV’s memory (see page 106).
❏
Check your
Channel Fix
settings (see page 106).
Cannot receive any channels
when using cable TV
❏
Use
Auto Program
in the Channel menu to add receivable channels that are not
presently in the LCD projection TV’s memory (see page 106).
❏
Press
ANT
to select the CABLE input (see page 61).
Cannot receive or select
channels
❏
Use
Auto Program
in the Channel menu to add receivable TV channels that are
not presently in LCD projection TV memory (see page 106).
Some digital cable channels are
not being displayed
❏
Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
❏
The digital cable channel may be set to
Hidden
in the Digital Setup menu (see