General – Sony KDF-55WF655 User Manual

Page 125

Advertising
background image

Other Information

125

Othe

r I
n

fo

rm

a

tion

KDF-WE/WF655

2-059-370-12 (1)

General

Problem

Possible Remedies

How to reset TV to factory
settings

Turn on the TV. While holding down the

RESET

button on the remote control,

press the

POWER

button on the TV. (The TV will turn itself off, then back on

again.) Release the

RESET

button.

How to restore Video settings
to factory settings

Press

RESET

on the remote control while in the Video menu (see page 98).

How to restore Audio settings
to factory settings

Press

RESET

on the remote control while in the Audio menu (see page 102).

Cannot cycle through the other
video equipment connected to
the LCD projection TV

Be sure the

Label Video Inputs

option is not set to

Skip

(see page 113).

Cannot operate Menu

If a menu option appears in gray, this indicates that the menu option is not
available.

Lost password

In the password screen (see page 108), enter the following master password:

4357

. The master password clears your previous password; it cannot be used to

temporarily unblock channels.

TV makes “popping” sound
when turned on

This is a normal sound that results from the TV automatically degaussing each
time it is turned on.

TIMER/STANDBY LED on
front panel is lit

The LED (see page 24 or 126) blinks when the TV is turned on, then shuts off
when the picture is displayed. If the LED blinks continuously, this may indicate
the TV needs service. When lit, indicates that the timer is set (24 or 126). When
the timer is set, this LED will remain lit even when the TV is turned off.

Digital cable box does not work

If you are connecting a VCR and digital cable box using a splitter, as described on
page 41, you must use a special bi-directional splitter that is designed to work
with your digital cable box. Contact your cable provider for details.

Cannot record digital channels
to VCR

Only analog channels can be recorded to your VCR.

The replacement lamp does not
light up

The screw of the lamp cover may be slanted. Take out the screw, insert it straight
into the screw hole, and then tighten it completely (see page 19 for KDF-WE655
series, see page 22 for KDF-WF655 series).

TV cabinet creaks

When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.

Advertising
This manual is related to the following products: