Sony KDF-55WF655 - Manual (Page 58)

Setting Up the LCD Projection TV
58
KDF-WE/WF655
2-059-370-12 (1)
Setting Up the LCD Projection TV Channel List
After you finish connecting the TV, you need to run the Initial Setup feature,
which automatically creates a list of available analog and digital channels.
The Initial Setup screens appear when you turn on your TV for the first time
after hooking it up. If you do not want to set up the channels at this time, you
can do it later by selecting the Auto Program option in the Channel menu
(see page 106).
Using Initial Setup
To run Initial Setup the first time you turn on your TV
1
Press POWER to turn on the TV.
The Initial Setup screen appears.
2
Press V or v to select the on-screen display language. Then press .
The message “Start auto program now?” appears.
3
Press V or v to select “Yes”, then press only.
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
To run Auto Program again at a later time
❑ Use the Auto Program feature as described on page 106.
To add individual digital channels
❑ Use the Digital Channels feature as described on page 106.
✍
The Initial Setup feature does not apply for installations that use a
cable box for all channel selection.
✍
Auto Program may take up to 50 minutes to complete. A progress
bar is displayed while the channel list is being created.
If you are using a
CableCARD, Auto
Program is disabled for
the CABLE input.
z