Sony MDR-EX75SLV User Manual

Stereo headphones, Ab d c, Mdr-ex75

Advertising
background image

English

Features

• High-sensitivity driver units reproduce premium quality sound and wide dynamic

range.

• Excellent wearing comfort from silicone rubber earbuds and angled earbuds structure.
• 2-foot short cord ideal for armband use; supplied extension cord (2 feet) ideal for

general use.

How to use

Wear the earpiece marked R in your right ear and the one marked L in your left ear.

How to use the carrying case (see fig. A)

1

Press the case lightly on either side, as shown in the illustration to open. Hold
the bottom of the case to not drop it.

2

Place the headphones in the case, and wind the cord around the side of the
case. The plug can be placed at the rear of the case.

How to install the earbuds correctly (see fig. B)

If the earbuds do not fit your ears correctly, low-bass sound may not be heard. To enjoy
better sound quality, change the earbuds to another size, or adjust the earbuds position to
sit on your ears comfortably and fit your ears snugly. The M size earbuds are attached to
the headphones before shipment. If you feel the M size earbuds do not suit your ears,
replace them with the supplied S or L size earbuds. When you change the earbuds, install
them firmly on the headphones to prevent the earbud from detaching and remaining in
your ear.

Cleaning the earbuds

Remove the earbuds from the headphones, and wash them with a mild detergent solution.

Specifications

Type:

Closed, dynamic

Driver units:

9 mm (CCAW adopted), dome type

Power handling capacity: 100 mW (IEC*)
Impedance:

16

Ω at 1 kHz

Sensitivity:

103 dB/mW

Frequency response:

6 – 24,000 Hz

Cord:

Approx. 0.61 m (24 in.), OFC litz cord

Plug:

Gold-plated stereo mini plug

Mass:

Approx. 4 g (0.14 oz.) (without cord)

Supplied accessories
Extension cord (0.61 m, Gold-plated stereo mini jack

y Gold-plated L-shaped stereo

mini plug) (1)
Earbuds (S

× 2, M × 2, L × 2)

Carrying case (1)

*IEC = International Electrotechnical Commission

Design and specifications are subject to change without notice.

Precautions

• To connect the extension cord, insert the stereo mini plug fully into the jack until you

hear a click (See. fig. C).

• To disconnect the extension cord, pull it out by the plug, not the cord, to avoid

damaging inner conductors.

• Please keep your headphones clean at all times especially inside the rubber earbud (see

fig. D).
If any dust or ear wax inside the earbud, you may experience some listening
difficulties.

• Listening with headphones at high volume may affect your hearing. For traffic safety,

do not use while driving or cycling.

• The earbuds may deteriorate due to long-term storage or use.
• Install the earbuds firmly onto the headphones. If an earbud accidentally detaches and

is left in your ear, it may cause injury.

There is EP-EX1 available (sold separately) as an optional replacement earbuds.

Stereo Headphones

MDR-EX75

© 2008 Sony Corporation Printed in Thailand

Operating Instructions
Manual de instrucciones

3-288-956-11(1)

Extension cord
(supplied)

A

B

D

C

Advertising
This manual is related to the following products: