Setting a screensaver type, Screensaver – Sony NWZ-E436FBLK User Manual
Page 75
NWZ-E435F / E436F / E438F.GB. 4-109-569-11 (1)
Common Settings
Setting a Screensaver Type
You can set the screensaver to either “Clock” or “Blank” for when there is no
operation for more than 30 seconds during song playback or FM tuner
reception.
Settings
5-way button
BACK/HOME
button
Press and hold the BACK/HOME button until the Home menu appears.
Press the /// button to select (Settings), and then press
the button to confirm.
Press the /// button to select “Common Settings,” and then
press the button to confirm.
The list of “Common Settings” appears.
Press the /// button to select “Screensaver,” and then press
the button to confirm.
Press the /// button to select “Type,” and then press the
button to confirm.
The list of screensaver types appears.
Press the /// button to select a desired type, and then press
the button to confirm.
After confirming, the screen in step
appears again.
“Clock”: When there is no operation for more than 30 seconds, a clock
appears as a screensaver. (Default setting)
“Blank”: When there is no operation for more than 30 seconds, the
screen goes off.
Table of
Cont
ents
Men
u
Inde
x