Sony wega KV-36FS16 - Manual (Page 13)

Installing the TV
7
Cable and Antenna If your cable provider does not feature local channels, you may find
this set up convenient.
Select CABLE or antenna (ANT) mode by pressing ANT on the remote
control.
Cable Box
Connections Some pay cable TV systems use scrambled or encoded signals that
require a cable box to view all channels.
Cable Box
1 Connect the coaxial connector from your cable service to the
cable box’s IN jack.
2 Using a coaxial cable, connect the cable box’s OUT jack to the
TV’s VHF/UHF jack.
✍
This connection applies to all models except KV-36FS12.
✍
In order to receive channels with an antenna, you need to turn your Cable to OFF and
perform the Auto Program function (see page 29).
Rear of TV
AUX
TO CONVERTER
VHF/UHF
Antenna cable
(No connection to
CATV cable
TO CONVERTER)
✍
If you will be controlling all channel selection through your cable box, you should
consider using the Channel Fix feature (see page 29).
Rear of TV
OUT
Cable box
IN
Cable VHF/UHF