Connecting a satellite receiver, 12 connecting a satellite receiver – Sony wega KV-36FS16 User Manual
Page 18
Installing the TV
12
Connecting a Satellite Receiver
1
Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2
Using an A/V cable, connect the satellite receiver’s A/V OUT
jacks to the TV’s A/V IN jacks.
3
Connect a coaxial cable from your cable or antenna to TV’s
VHF/UHF jack.
✍
If your satellite receiver has an S VIDEO jack: For best picture quality, use an S VIDEO
connection instead of the yellow video cable on your combined A/V cable. Using an S
VIDEO cable, connect the satellite receiver’s VIDEO OUT jack to the TV’s S VIDEO IN
jack. S VIDEO does not provide audio, so audio cables must still be connected to provide
sound.
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
TV
Satellite receiver
Satellite antenna
cable
A/V cable
Coaxial
cable