Sony DCR-HC1000 - Manual (Page 42)

Recording 42
Searching for the
starting point
Searching for the last scene of the
most recent recording
– END SEARCH
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. When you use a cassette
without Cassette Memory, the END
SEARCH function will not work once you
eject the cassette after you have recorded on
the tape. If you use a cassette with Cassette
Memory, it will function even when you have
ejected the cassette.
1
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode.
2
Touch .
3
Touch .
The last scene of the most recent recording
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
To cancel the operation
Touch [CANCEL].
b Note
• The END SEARCH function will not work correctly
when there is a blank section between recorded
sections on the tape.
z Tip
• You can do this operation also by selecting [END
SEARCH] in the menu setting. When the PLAY/
EDIT mode is selected, you can do this operation
by selecting [END SEARCH] short-cut on
(p. 54).
Searching manually – EDIT
SEARCH
You can search for the start point while
viewing the pictures on the screen. The sound
is not played back during the search.
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
2
Touch .
POWER switch
0:00:00 STBY 60min
EDIT
END SEARCH
EXECUTING
CANCEL
0:00:00 1 60min
Appears only with a
cassette with
Cassette Memory
0:00:00 STBY 60min
EDIT